Download
Euroclad_Roof_Vieo_Profile_Residentail_Gannets_Middlebeck_15
Previous
Next

Vieo is a standing seam roof profile that can be curved or tapered to achieve unique designs.

Vieo is comprised of an interlocking profiled aluminium or steel sheet that can be supplied as a roof sheet or as an insulated roofing system.   

By specifying Vieo you can create striking and sophisticated designs on a wide range of buildings applications.

  • Vieo is a long-strip metal sheet with a wide pan and a traditional look that works very well on all kinds of buildings including residential, commercial and public buildings
  • It can offer significant cost savings versus traditional materials like zinc and lead and is a manufactured sheet product, which is faster and less onerous to install correctly than traditional materials
  • Vieo is available in steel and aluminium and can even be manufactured in a wide range of colours, whatever the material choice the very latest rollforming machines are employed to manufacture Vieo sheets

Technical & Downloads

Product Parameters

  Pre-finished Steel Aluminium
Standard cover width 454mm 454mm
Cover width available 200mm – 454mm* 200mm – 454mm*
Cover width of curves 275mm – 454mm* 275mm – 454mm*
Cover width of tapers 200mm – 500mm* 200mm – 500mm*
Maximum rolled sheet length 20 metres site rolled; 14 meters delivered 20 metres site rolled; 14 meters delivered
Minimum straight length 250mm 250mm
Minimum pre-curved / taper length 2 meters 2 meters
Maximum pre-curved sheet length 20 metres 20 metres
Minimum induced curve radius convex 2 metres 0.5 metres
Minimum induced curve radius concave n/a n/a
Minimum self curve radius convex 15 metres 15 metres
Minimum self curve radius concave 15 metres 15 metres

*Vieo can be manufactured in any width from 200mm up to a maximum of 517mm. However advice should be sought for widths of 454mm to 517mm, which are not supported by current certification and testing. Note -Tapers cannot be induced curved or site rolled.

Vieo sheets can be curved or tapered for the perfect fit and to help achieve unusual designs. They have been used to great effect on the roof and walls of buildings where the roof sheets curve around the eaves into the wall. 

To avoid potential problems delivering sheets to site, particularly where sheet lengths exceed 14 metres, Vieo can be produced onsite. This can avoid the need for storage as Vieo sheets can be produced precisely when they are needed.

Material Options

    Pre-finished Steel Aluminium
0.7mm gauge Colorcoat HPS 200 Ultra  
Colorcoat LG  
Colorcoat Prisma  
0.9mm gauge ARS  
PVDF  
Organic Patina  
Vieo Zinc  

PDF

Euroclad_Vieo_Profile_Cold_Roof

Euroclad_Vieo_Profile_Warm_Roof_System_over_MW5_Inverted_Liner_Upslope

Euroclad_Vieo_Profile_Warm_Roof_System_over_Timber_Frame_and_Deck

DWG

Euroclad_Vieo_Profile_Cold_Roof_Profile

Euroclad_Vieo_Warm_Roof_System_over_MW5_Inverted_Liner_Upslope

Euroclad_Vieo_Warm_Roof_System_over_Timber_Frame_and_Deck

Sustainability

Our Approach to Sustainability

Euroclad Group is committed to continual improvement, striving to manufacture and deliver the most environmentally responsible and sustainable products. Key to this is establishing, implementing and maintaining an Integrated Management System which complies with the requirements of ISO9001, ISO14001.

Euroclad Group aims to make specifying the most sustainable products simpler and more transparent. To this end it has implemented BES 6001 Responsible Sourcing of Construction Products standard that independently demonstrates that a building material has been produced in a way that has minimised its environmental impact and is sustainable.

Services