Elite Roof Systems

Elite System 1 Roof System
Previous
Next

An Elite System is a built-up metal roofing solution which offers choice, performance and an entire system guarantee.

Elite Systems provide a range of superior roofing components that combine to form a guaranteed roof system with defined tested and accredited performance.

  • Elite Systems are guaranteed for up to 25 years with the Elite Plus system guarantee
  • Elite Systems can be used for a multitude of roof and wall applications, all with inherent design flexibility
  • Exceptional low pitch roofing solution can be achieved with curves and tapers

Elite Roof Systems

Elite Roof Systems are all built on the same principle; site assembled systems comprising of a liner sheet (structural deck) separated by a spacer system, with an external profile in steel or aluminium and mineral wool sitting between the sheets to provide thermal and acoustic insulation.

Elite 1
Elite 2
Elite 3
Elite 4
Elite 5
Elite 6
Elite 7

Elite System 1

Elite System 1 Roof System
Elite System 1 is recommended for use in designs with a finished roof pitch equal to or greater than 4°.

Barrel vault curved roofs can also be achieved where crown sheet end laps are equal to or greater than 2.5° finished pitch.

The 32-167-1000 roof external profile is fixed to the Quattro spacer system, which creates the insulation gap between the outer sheet and the 19-167-1000 liner.

Elite System 2

Elite System 2 Roof System
Euroclad Elite System 2 provides a high quality trapezoidal roofing system with a finished roof pitch equal to or greater than 4°. This roofing system includes a Class B non-fragile walkable liner and offers a wide range of  U Values.

Barrel vault curved roofs can also be achieved where crown sheet end laps are equal to or greater than 2.5° finished pitch.

The 32-167-1000 roof external profile is fixed to the Quattro spacer system, which creates the insulation gap between the outer sheet and the 32-200-1000 MW5 liner, and is available with standard or perforated sheets for acoustic purposes.

Elite System 3

Elite System 2 Roof System
Euroclad Elite System 3 provides a premium low pitch roofing solution with continuous outer sheets with no endlaps and no through fixings.
 
A flexible design can be achieved offering a wide range of  U Values.

The SF500 roofing sheet can used on curved roofs with a minimum radius of 50 meters, which allows ridge heights to be kept to a minimum for a clean low impact roofline.

Elite System 4

Elite System 4 Roof System
Euroclad Elite System 4 offers a low pitch standing seam roof option, with no endlaps and no through fixings.

Elite System 4 provides the flexibility needed to achieve aesthetically pleasing yet functional designs for industrial or architectural applications. The Euroseam profile sheet can be used to achieve a whole range of curves from large barrel vaults to mutiple curved designs.

The Euroseam® profile can be supplied in natural stucco embossed aluminium, pre-painted PVDF, ARS, Duragloss or Organic Patina.
 

Elite System 5

Elite System 5 Roof System
Euroclad Elite System 5 provides an adaptable low pitch roofing solution with outstanding performance and can be installed to achieve a wide range of U values.
 
The Euroseam® external  roof profile is fixed to halters attached to the Quattro spacer system and a tophats which creates the insulation gap between the outer sheet and the structural deck.

*Elite System 5 Acoustic absorption version is shown.

Elite System 6

Elite System 6 Roof System
Euroclad Elite System 6 provides an adaptable low pitch roofing solution with outstanding performance and can be installed to achieve a finished pitch down to 1°.
 
The SF500 external roof profile is fixed to the Quattro spacer system and tophats which creates the insulation gap between the outer sheet and the structural deck.

The SF500 roofing sheet can used on curved roofs with a minimum radius of 50 meters, which allows ridge heights to be kept to a minimum for a clean low impact roofline.

 

Elite System 7

Elite System 7 Roof System
Euroclad Elite System 7 provides a high-quality trapezoidal roofing system utilising a Euroclad structural deck fitted directly to the main frame without secondary steelwork.

The 32-167-1000 roof external profile is fixed to the Quattro spacer system and tophats which creates the insulation gap between the outer sheet and the structural deck.

The structural decks are available standard or perforated for acoustic purposes.

Technical & Downloads

Thermal Performance

With the increasing pressure to meet new performance criteria for all building envelopes, Euroclad Elite Systems deliver on all counts, providing the flexibility of construction to comfortably deliver specified air tightness, sound reduction and thermal performance in accordance with Building regulations. 


 

Quattro Bracket Depth (mm)

Elite 1

Elite 2

Elite 3

Elite 4

Elite 5

Elite 6

Elite 7

80

0.57

N/A

N/A

N/A

0.29

0.38

0.38

100

0.45

0.48

0.48

0.34

0.25

0.32

0.32

120

0.37

0.4

0.4

0.29

0.22

0.28

0.28

140

0.32

0.34

0.34

0.26

0.2

0.25

0.25

150

0.3

0.31

0.31

0.24

0.19

0.24

0.24

160

0.28

0.29

0.29

0.23

0.19

0.23

0.23

180

0.25

0.26

0.26

0.21

0.17

0.2

0.2

185

0.24

0.25

0.25

0.2

0.17

0.2

0.2

200

0.23

0.23

0.23

0.19

0.16

0.19

0.19

220

0.2

0.21

0.21

0.18

0.15

0.17

0.17

240

0.19

0.19

0.19

0.16

0.14

0.16

0.16

260

0.17

0.18

0.18

0.15

0.13

0.15

0.15

280

0.16

0.16

0.16

0.14

0.12

0.14

0.14

300

0.15

0.15

0.15

0.13

0.12

0.13

0.13

320

0.14

0.14

0.14

0.13

0.11

0.12

0.12

340

0.13

0.13

0.13

0.12

0.11

0.12

0.12

360

0.12

0.13

0.13

0.11

0.1

0.11

0.11

380

0.12

0.12

0.12

0.11

0.1

0.11

0.11

400

0.11

0.11

0.11

0.1

0.09

0.1

0.1


 
Thermal Performance
Other U-values are available through consultation with Technical Services.

‘U’ value calculations have been carried out in accordance with BR433 March 2006 and EN ISO 6946.

Calculated from systems modelled on 3 dimensional finite element analysis software fully compatible with BS EN ISO 10211-1/10211-2.

Assumptions used in calculation:

Elite Systems 1: Quattro brackets at typical 1.167m centres, purlins at 1.5m centres.

Elite Systems 2 - 7 : Quattro brackets at typical 1.2m centres, purlins/ Quattro rails at 1.5m centres.

0.040 Lambda 90/90 insulation quilt filling the void between liner sheet and underside of external profile.

Euroclad Group employ a holistic approach to sustainability which aims to minimise the environmental impact of the production of components,  manufacturing processes, transport, installation, use and end of life. Also included is life cycle assessment of environmental impact categories such as global warming, resource depletion, embodied energy, eutrophication, acidification and volatile organic compound (VOC) emissions. 
 
As part of the commitment to reducing Euroclad Group’s carbon footprint there is a process of continuous improvement that includes, but is not exclusive to, the ongoing accreditation of the ISO 14001 environmental management system. 
 

Acoustic Performance

Due to increasing demands for bespoke acoustic design for buildings Euroclad have developed Elite Systems to accommodate a wide range of performances.
 
The built-up nature of the products allows far greater flexibility in this field when compared with traditional methods. Elite Systems can be modified to meet requirements by the inclusion of various components. Common applications for acoustic constructions are education establishments, swimming pools, sports halls, cinemas, hotel or private accommodation.
 
Part E of the Building Regulations and Building Bulletin 93 referenced therein have raised the stakes regarding acoustic performance of schools and other educational facilities. There has also been a general increase in the awareness of acoustic performances of buildings and ‘noise pollution’.
 
Elite Systems cover constructions using both structural deck and twin skin liner and have been geared to achieve maximum performance flexibility whilst maintaining integral performance and basic system componentry.

Colours

A large selection of colours are available for the Eurobond Panel range.

COLORCOAT PRISMA®
Utilises cutting edge three layer manufacturing technology to create an optimised, robust and chrome free pre-finished steel product. Designed to withstand the rigours of the external environment, versatile, lightweight and strong, Colorcoat Prisma® pre-finished steel is the ideal choice for your building envelope for exceptional UV performance and long lasting colour. The contemporary colour range includes a selection of natural metal colours, as well as a wide selection of inspired Matt shades such as Matt Metallics ideal for facade applications.

Colorcoat Prisma colourcard UK

COLORCOAT HPS200 ULTRA®
Designed to withstand even the most demanding and aggressive environments, Colorcoat HPS200 Ultra® pre-finished steel provides super durability and corrosion resistance. Whatever your type of building, from warehouses to houses, retail outlets to processing plants, Colorcoat HPS200 Ultra® demonstrates proven performance and reliability. Colorcoat HPS200 Ultra® pre-finished steel provides exceptional performance and corrosion resistance for building envelope applications.
 

Colorcoat HPS200 Ultra colour card UK

Details

Euroclad_EliteSystems_Elite1 Detail

Euroclad_EliteSystems_Elite1 Detail

Euroclad_EliteSystems_Elite2 Detail

Euroclad_EliteSystems_Elite2 Detail

Euroclad_EliteSystems_Elite3 Detail

Euroclad_EliteSystems_Elite3 Detail

Euroclad_EliteSystems_Elite4 Detail

Euroclad_EliteSystems_Elite4 Detail

Euroclad_EliteSystems_Elite5 Detail

Euroclad_EliteSystems_Elite5 Detail

Euroclad_EliteSystems_EuroseamUniversalDetails

Euroclad_EliteSystems_EuroseamUniversalDetails

NBS

Elite 1 NBS Specification

Elite 2 NBS Specification

Elite 3 NBS Specification

Elite 4 NBS Specification

For Wind Load Calcuations please complete the form and return to rcs.technical@eurocladgroup, or alternateively complete the online form below.

Initial Wind Load Calculation Tool is for simple roof and wall designs. This is an initial wind load calculation provided for Elite systems and would ultimately have to be checked by a suitably qualified engineer.  
 

Euroclad Elite Systems Initial Wind Load Estimation Form

Wind Load Online Form

Building length parallel to ridge
Building width perpendicular to ridge
For barrel vault roofs, please use the eaves pitch
Monopitch, Duopitch, Barrel Vault, etc.
For multiple pitched roofs or complex geometries, please provide plan and elevation views.

Sustainability

Our Approach to Sustainability

Euroclad Group is committed to continual improvement, striving to manufacture and deliver the most environmentally responsible and sustainable products. Key to this is establishing, implementing and maintaining an Integrated Management System which complies with the requirements of ISO9001, ISO14001.

Euroclad Group aims to make specifying the most sustainable products simpler and more transparent. To this end it has implemented BES 6001 Responsible Sourcing of Construction Products standard that independently demonstrates that a building material has been produced in a way that has minimised its environmental impact and is sustainable.

Services